<sub id="zjbjb"><listing id="zjbjb"></listing></sub>

        <address id="zjbjb"></address>

        <address id="zjbjb"></address>

          PRODUCTS
          PRODUCTS
          YOUR LOCATIONㄩHOME >> PRODUCTS >> Ceramic Valve Series >> Pneumatic- Manual Ceramic Ball valve
          PRODUCT DESCRIPTIONㄩ
          Pneumatic- Manual Ceramic Ball valve
          PRODUCT DETAILSㄩ


          Characteristics

          This valve  is application as on-off or pipelines with high-hardness grains or wwith both soft grns and corrosive medium .Its nominal pressure  is 1.6Mpa ,and applicable temperature ≒200⊥ ﹝And air supply pressure 0.6-0.8 Mpa .All mediumcontacting parts are made of structure ceramic ,featuring extremely high chemical stability and hardnessㄗRockwell Hardness HRC90 0ㄘㄛOnly next to diamond .Therefor ,this valve  has  extremely strong resistance to abrasion ,corrosion and erosion ,good heat insulation and small thermal expansion the ball body is made with advanced grinding equipment and process with high每precision ball roundness and good surface quality ,and after facing 每up with the valve seat ,a good seal ability can be obtained by means og self-lubrication of Zr02CERAMIC .thanks to the ceramic*s strong resistance to abrasion ,this valves is durable and extremely reliable with a long service life being 2-4 times of that Ti alloy and Monel  valves

          Material for main Parts

          Item

          Name

          Material

          item

          name

          Material

          1

          Body

          WCB

          10

          Stem

          2Cr13

          2

          Mid-Body

          WCB

          11

          Packing

          35#

          3

          Middle Body Sleeve

          Ind Ceramic

          12

          Hex nut

          PTFE

          4

          Seat

          Ind Ceramic

          13

          Equal每length Stud

          2H

          5

          Flange Sleeve

          Ind Ceramic

          14

          Packing Gland

          WCB

          6

          Ball

          17-4PH

          15

          Yoke

          Q235

          7

          O ring

          Fluorine Rubber

          16

          Pneumatic

          Assemble

          8

          Spring

          17-4PH

          17

          Cylinder

          Assemble

          9

          Washer

          .35#

           

           

           

          Application Specification

          Design & Manuafcture

          GB/ T12224

          Connection end dimension

          Face to face

          GB/T12221

          Flange dimension

          Gb/T9113.1

          Inspect & Test

          JB/T 9092

          Material

          Carbon Steel

          GB/T 12229

          Stainless Steel

          GB/T12230

          Mark

          GB/T12220

          Supply

          GB/T12252

          ZHONGCHENG VALVE GROUP CO.,LTD.
          E-mail: sales@zc-valve.com Telㄩ+86-577-67331552
          一本一道波多野结衣无码

              <sub id="zjbjb"><listing id="zjbjb"></listing></sub>

                <address id="zjbjb"></address>

                <address id="zjbjb"></address>